Prodeso Heat Grip 5 / Stick System
SKU: PRD-HG5-STICK-SYS

Prodeso Heat Grip 5 / Stick System
SKU: PRD-HG5-STICK-SYS
Product Information
Quantity
All products are subject to inventory availability, shipping cost variations, levied tariffs, and dye lot variation.
Product Tech Sheet
A world of warmth and comfort in harmony with nature. The electric underfloor and wall heating system Prodeso Heat Grip 5 System is an innovative system that allows to obtain in a short time and at low cost a pleasantly warm and extremely comfortable environment. The membrane is applied using normal cementitious adhesives and thanks to its uncoupling and waterproofing properties can be installed on cracked substrates and also during shrinkage. Thanks to the latest generation Wi-Fi thermostat, the system can be programmed daily or weekly and even remotely, optimizing comfort and reducing consumption.
Packaging Information
4 Core Functions — Decoupling, Vapour Management, Load Distribution & Waterproofing

Product Codes — Heat Grip 5 Membrane & Heat Grip 5 Stick Membrane

9 rolls per pallet
15m per roll
1m x 15m roll, 5.5mm thickness (both versions)
| Property | Catalog value |
|---|---|
| Product type | Heated Uncoupling Membrane System |
Unlisted values require manufacturer confirmation. Abrasion or DCOF data alone does not establish universal pool safety or approval for every application.
Frequently Asked Questions
What formats are available for Prodeso Heat Grip 5 / Stick System?
Listed formats: 1m x 15m roll, 5.5mm thickness (both versions). Confirm current availability before ordering.
Where can I use Prodeso Heat Grip 5 / Stick System?
Check the manufacturer’s application guidance with your installer. Do not assume suitability for wet areas or exterior use.
What finish or material should I expect?
The product specification lists Uncoupling & Heating Membrane with HDPE + Polypropylene Structure. View a sample and review the manufacturer’s technical sheet before installation.
You May Also Like

Flat Line Listello

Aluminum Internal Angle Trim

Aluminum Cube Trim

Skirting, Corners & End Caps
Prodeso Heat Grip 5 / Stick System
SKU: PRD-HG5-STICK-SYS
Specifications
| Material | Uncoupling & Heating Membrane with HDPE + Polypropylene Structure |
| Profile | Electric Underfloor & Wall Heating Membrane |
| Format | Roll — 1m x 15m (15 sqm per roll) |
| Primary Function | Radiant Heating, Decoupling (Crack Bridging), Vapour Management, Load Distribution, Waterproofing |
| Available Sizes | 1m x 15m roll, 5.5mm thickness (both versions) |
| Available Finishes | Standard (Thin-Set Applied) / Stick (Self-Adhesive) |
| Finish Count | 2 |
| Installation | Standard version: applied with thin-set adhesive on substrate; Stick version: self-adhesive — peel and stick directly onto clean flat surfaces (old tiles, plywood, OSB) without bottom thin-set; Heat Grip 5 Cable snaps into membrane reliefs; tile directly on top |
| Available Lengths | 15m per roll |
| Box Quantity | 9 rolls per pallet |
| Subcategory | Crack Isolation & Waterproof Membranes |
| Product Type | Heated Uncoupling Membrane System |
| Product Codes | [{"code":::::::"Prodeso Heat Grip 5 Membrane (5.5mm)"},{"code":::::::"Prodeso Heat Grip 5 Stick Membrane (5.5mm, Self-Adhesive)"}] |